Installation -699580755

TM 9-2320-363-20-2

CLEANING/INSPECTION

INSPECT GLADHAND SEAL FOR CRACKS, TEARS, OR ANY EXCESSIVE WEAR. IF PRESENT,

REPLACE GLADHAND SEAL.

CLEAN AND INSPECT ALL REMAINING PARTS IN ACCORDANCE WITH CHAPTER 2.

I N S T A L L A T IO

NOTE

P r o c e d u r e is for emergency gladhand and is the same for service gladhand.

INSTALL SEAL (10), CHAIN (8), AND DUMMY (7) ON GLADHAND (11).

WARNING

M a k e sure all air lines and fittings are clear of debris. Make sure excess

p i p e sealant compound does not enter air lines or fittings. Failure to do so

c o u l d result in equipment failure and/or injury to personnel.

S e a l a n t compounds can burn easily, can give off harmful vapors, and are

harmful to skin and clothing. To avoid injury or death, keep away from open

f i r e and use in well-ventilated area. If sealant compound gets on skin or

c l o t h i n g , wash immediately with soap and water.

COAT THREADS WITH PIPE SEALANT COMPOUND AND INSTALL BULKHEAD FlTTING (9) IN

GLADHAND (11).

INSTALL GLADHAND ASSEMBLY (5), NEW LOCK WASHER (4), AND NUT (3) IN BRACKET (6).

COAT THREADS WITH PIPE SEALANT COMPOUND AND INSTALL CONNECTOR (2).

CONNECT TUBE (1) TO CONNECTOR (2).

4-545