REMOVAL -699580735

9-2320-363-20-2

REMOVAL

WARNING

M a k e sure all air lines and fittings are clear of debris. Make sure excess

p i p e sealant compound does not enter air lines or fittings. Failure to do so

c o u l d result in equipment failure and/or injury to personnel.

S e a l a n t compounds can burn easily, can give off harmful vapors, and are

harmful to skin and clothing. To avoid injury or death, keep away from open

f i r e and use in well-ventilated area. If sealant compound gets on skin or

c l o t h i n g , wash immediately with soap and water.

COAT THREADS WITH PIPE SEALANT COMPOUND AND INSTALL 13 CONNECTORS (1), 4

SENDING UNITS (2), 3 ELBOWS (3), AND 3 PIPE PLUGS (4) IN CAB AIR JUNCTION BLOCK (5).

APPLY SEAL `N' CAULK TO MATING SURFACE OF CAB AIR JUNCTION BLOCK (5).

INSTALL CAB AIR JUNCTION BLOCK (5), GROUND WIRE (6), THREE WASHERS (7), THREE

SCREWS (8), AND THREE KEP NUTS (9).

4-525