INSTALLATION -699580729

TM 9-2320-363-20-2

CLEANING/INSPECTION

Clean and inspect all parts in accordance with Chapter 2.

INSTALLATION

WARNING

Make sure all air lines and fittings are clear of debris. Make sure excess pipe

sealant compound does not enter air lines or fittings. Failure to do so could

result in equipment failure and/or injury to personnel.

Sealant compounds can burn easily, can give off harmful vapors, and are

harmful to skin and clothing. To avoid injury or death, keep away from open

fire and use in well-ventilated area. If sealant compound gets on skin or

clothing, wash immediately with soap and water.

NOTE

Procedure is the same for all vehicles except as noted.

Step 1 is for M915A2 only.

Step 2 is for all except M915A2 only.

COAT THREADS WITH PIPE SEALANT COMPOUND AND INSTALL THREE PLUGS (1), TWO ELBOWS (2),

THREE CONNECTORS (3), AND CONNECTOR (4) IN CONSTANT AIR JUNCTION BLOCK (5).

COAT THREADS WITH PIPE SEALANT COMPOUND AND INSTALL FOUR PLUGS (6), ELBOW (7), TW O

CONNECTORS (8), CONNECTOR (9), AND FITTING (10) IN CONSTANT AIR JUNCTION BLOCK (5).

Change 3 4-519