 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-2320-363-20-2
WARNING
M a k e sure all air lines and fittings are clear of debris. Make sure excess
pipe sealant compound does not enter air lines or fittings. Failure to do so
c o u l d result in equipment failure and/or injury to personnel.
S e a l a n t compounds can burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or death, keep away from open
f i r e and use in well-ventilated area. If sealant compound gets on skin or
c l o t h i n g , wash immediately with soap and water.
NOTE
Perform steps 1 thru 3 only if fittings have been removed from air tank.
1.
COAT PIPE THREADS OF NEW DRAIN VALVE (1), NEW PLUG (2), NEW CONNECTOR (3), AND
TWO NEW ELBOWS (4) WITH PIPE SEALANT COMPOUND.
INSTALL DRAIN VALVE (1), PLUG (2), CONNECTOR (3), AND TWO ELBOWS (4) IN NEW AIR
2.
TANK (5).
INSTALL TWO MOUNTING BRACKETS (6), TWO WASHERS (7), AND TWO SCREWS (8).
3.
4.
INSTALL TWO SPACERS (9), AIR TANK (5), FOUR WASHERS (10), FOUR SCREWS (11), FOUR
WASHERS (12), AND FOUR NEW LOCK NUTS (13).
5.
CONNECT THREE TUBES (14) TO AIR TANK (5).
6.
INSTALL STORAGE BOX (15), SIX WASHERS (16), AND SIX SCREWS (17).
NOTE
Follow-on Maintenance:
I n s t a l l spare tire (TM 9-2320-363-10).
P e r f o r m standard leak test (page 2-24).
4-461
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals