 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
FRONT BRAKESHOE AND LINING REPLACEMENT (CONT)
.
INSPECTION
1.
BRAKE LINING THICKNESS MUST BE NO LESS THAN 1/4 IN. IF BRAKE LINING IS LESS THAN
1/4 IN., REPLACE BRAKE LINING.
2.
THERE MUST BE NO LESS THAN 1/32-lN. CLEARANCE BETWEEN TOP OF BRAKE LINING AND
TOP OF ALL RIVET HEADS. IF THERE IS LESS THAN 1/32-lN. CLEARANCE BETWEEN TOP OF
BRAKE LINING AND ANY RIVET HEAD, REPLACE BRAKE LINING.
INSPECT REMAINING PARTS IN ACCORDANCE WITH CHAPTER 2.
3.
INSTALLATION
1.
APPLY THIN FILM OF ANTISEIZE COMPOUND TO CONTACT POINTS (1, 2, 3, AND 4), TWO
SPIDER ANCHOR PINS (5 AND 6), AND SMALL DIAMETER OF UPPER AND LOWER CAM
ROLLERS (7 AND 8).
INSTALL RETAINING SPRING (9) ON EACH BRAKESHOE (10 AND 11).
2.
INSTALL TWO BRAKESHOES (10 AND 11) ON TWO SPIDER ANCHOR PINS (5 AND 6).
3.
4.
INSTALL RELEASE SPRING (12) ON TWO BRAKESHOES (10 AND 11).
INSTALL UPPER CAM ROLLER (7) BETWEEN UPPER BRAKESHOE (10) AND S-CAM (13).
5.
INSTALL LOWER CAM ROLLER (8) BETWEEN LOWER BRAKESHOE (11) AND S-CAM (13).
6.
.
NOTE
Follow-on Maintenance:
I n s t a l l hub and drum (page 4-584).
4-408
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals