 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
WARNING
Hot oil can cause serious burns. Make sure transmission oil is cool before
working on transmission oil filter. Failure to do so could result in serious
injury to personnel.
Spilled transm ission fluid is very slippery.
Wipe up any spilled fluid
immediately. Failure to do so could result in serious injury to personnel.
NOTE
Place suitable drain pan under transmission oil filter.
REMOVE OIL FILTER ELEMENT (1) AND SEAL (2) FROM OIL FILTER BASE ASSEMBLY (3). DISCARD OIL
FILTER ELEMENT AND SEAL.
CLEANING/INSPECTION
Clean and inspect all parts in accordance with Chapter 2.
INSTALLATION
1.
APPLY LIGHT COATING OF LUBRICATING OIL ON SEAL (2).
WARNING
Spilled transmission fluid is very slippery. Wipe up any spilled fluid immediately.
Failure to do so could result in serious injury to personnel.
2.
INSTALL NEW OIL FILTER ELEMENT (1) WITH NEW SEAL (2) IN OIL FILTER BASE ASSEMBLY (3). TIGHTEN
OIL FILTER ELEMENT 2/3-TURN AFTER CONTACTING SEAL.
NOTE
Follow-on Maintenance:
Fill transmission to proper oil level (Unit PMCS, TM 9-2320-363-20-1).
Change 3 4-347
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals