 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
NOTE
Tag connectors and wires prior to removal to aid in installation.
Step 3 is for the M915A2 only.
DISCONNECT 11 CONNECTORS (7) FROM 3 WIRING HARNESSES (8, 9, AND 10).
3.
NOTE
Step 4 is for the M916A1 only.
4.
DISCONNECT 12 CONNECTORS (7) FROM 3 WIRING HARNESSES (8, 9, AND 10).
REMOVE TWO LOCK NUTS (11) AND DISCONNECT FIVE WIRES (12) FROM JUNCTION BLOCK
5.
(13). DISCARD LOCK NUTS.
NOTE
Step 6 is for the M915A2 only.
REMOVE EIGHT SELF-TAPPING TORX SCREWS (14) AND MOUNTING PANEL (3) FROM REAR
6.
WALL OF VEHICLE.
NOTE
Step 7 is for the M916A1 only.
7.
REMOVE SIX SELF-TAPPING TORX SCREWS (14) AND MOUNTING PANEL (3) FROM REAR WALL
..
..
OF VEHICLE.
REMOVE TWO SCREWS (15) AND JUNCTION BLOCK (13).
8.
9.
REMOVE THREE KEP NUTS (16), THREE WASHERS (17), FUSE AND RELAY PANEL (18), THREE
SPACERS (19), AND THREE CAPSCREWS (20).
C L E A N I NG
/I N S P E C T IO
N
Clean and inspect all parts in accordance with Chapter 2.
4-301
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals