 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
NOTE
Procedure is the same for both sides; left side is shown.
1.
INSTALL NEW BUSHING (20) IN ABS SENSOR MOUNTING BRACKET (19).
2.
COAT OUTSIDE OF ABS SENSOR (18) WITH HEAT RESISTANT GREASE.
3.
INSTALL ABS SENSOR (18) IN ABS SENSOR MOUNTING BRACKET (19) UNTIL FULLY SEATED.
4.
INSTALL ABS SENSOR AND MOUNTING BRACKET ASSEMBLY (16), CLAMP (15), WASHER (14),
AND SCREW (13) ON SPINDLE (17).
5.
INSTALL CLAMP (12), WASHER (9), SCREW (10), WASHER (11), AND NEW LOCK NUT (8) ON AIR
BRAKE CHAMBER BRACKET (7). -
6.
INSTALL CLAMP (6), WASHER (5), AND NEW LOCK NUT (4) ON AIR BRAKE CHAMBER BRACKET
(7).
7.
CONNECT ABS CONNECTOR (2) TO WIRING HARNESS CONNECTOR (3) AND INSTALL NEW TIE
WRAPS (1).
NOTE
Follow-on Maintenance:
Install front hub and drum (page 4-588).
Connect batteries (page 2-29).
Change 2
4-290.1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals