 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM
9-2320-363-20-2
1.
DISCONNECT TUBE (1) FROM CONNECTOR (2).
.
2.
DISCONNECT CONNECTOR (3) FROM HARNESS (4).
DISCONNECT TUBE (1) FROM ATOMIZER (5).
3.
4.
DISCONNECT ATOMIZER (5) FROM BUSHING (6).
5.
REMOVE BUSHING (6) FROM INTAKE MANIFOLD (7).
REMOVE TWO WING NUTS (8), TWO LOCK WASHERS (9), AND SADDLE (1 O). DISCARD LOCK
6.
WASHERS.
7.
REMOVE TWO NUTS (1 1), TWO LOCK WASHERS (12), TWO STUD AND NUT ASSEMBLIES (13),
AND CLAMP (14) FROM STARTING AID MOUNTING BRACKET (15). DISCARD LOCK WASHERS.
8.
REMOVE LOCK NUT (16), WASHER (17), WIRE (18), AND SCREW (19) FROM STARTING AID
MOUNTING BRACKET (15). DISCARD LOCK NUT.
REMOVE CONNECTOR (2) FROM VALVE (20).
9.
10.
LOOSEN TWO SCREWS (21) AND REMOVE VALVE (20) FROM STARTING AID MOUNTING
BRACKET (15).
11.
IF TUBE (1) IS DAMAGED, REMOVE LOCK NUT (22), CLAMP (23), TWO WIRE TIES (24), AND
TUBE (1). DISCARD LOCK NUT.
12.
IF STARTING AID MOUNTING BRACKET (15) IS DAMAGED, REMOVE TWO LOCK NUTS (25), TWO
WASHERS (26), TWO SCREWS (27), S T A R T I N G AID MOUNTING BRACKET (15), AND - T W O
SPACERS (28) FROM FRAME RAIL (29). DISCARD LOCK NUTS.
CLEANING/INSPECTION
Clean and inspect all parts in accordance with Chapter 2.
4-67
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals