Installation (Cont) -699580037

TM 9-2320-363-20-2

14. COAT NEW SEAL RING (15) WITH CLEAN ENGINE OIL AND INSTALL SEAL RING (15) ON OIL

COOLER (8).

15. INSTALL TWO NEW SEAL RINGS (16) IN OIL FILTER ADAPTER (2).

16. INSTALL NEW SEAL RING (17) AND THERMOSTAT (18) IN OIL FILTER ADAPTER (2).

NOTE

I f necessary, tap neck of oil cooler housing with plastic or fiber mallet to force

seal ring into engine block opening.

INSTALL OIL COOLER (8) ON ENGINE BLOCK (19).

17.

18.

INSTALL SUPPLY HOSE CLAMP (20) AND BOLT (21) HAND-TIGHT ON OIL FILTER ADAPTER (2).

19.

INSTALL THREE MOUNTING BOLTS (22) HAND-TIGHT.

20.

TIGHTEN THREE MOUNTING BOLTS (22) AND BOLT (21) TO 43-54 LB-FT (58-73 N.m).

21.

CONNECT OIL SAMPLE VALVE HOSE (23) TO CONNECTOR (3).

4-13