Figure C-19. Adapter, Constant Velocity U-Joint Bearing Cap Removal Tool

TM 9-2320-360-34-2

(1)

Fabricate from 1 in. (25 mm) mild steel round stock; 4 in. (102 mm) long.

(2)

Turn down 2.1/4 in. (57.15 mm) to .39 in. (10mm).

(3)

Tap 1 in. (25mm) of 10 mm diameter shaft with 10 mm by 1 in. (25 mm) threads.

(4)

Drill 5/8 in. (16 mm) hole 1 in. (25 mm) deep in 1 in. (25 mm) end.

(5)

Tap 1 in. (25 mm) of 3/4 in. by 16 diameter hole in 1 in. (25 mm) end.

(6)

All dimensions are in inches (millimeters).

Figure C-19. Adapter, Constant Velocity U-Joint Bearing Cap Removal Tool

C-14 Change 1