Disassembly (Cont.) -726030551

TM 9-2320-360-34-2

WARNING

Screw is under spring tension.

Remove screw slowly to relieve

tension and prevent serious Injury.

(14) Remove sockethead screw (22), spring (23),

washer (24), and shifter arm (25) from end cover

(26).

(14.1) Remove

preformed

packing

(25.1)

and

preformed packing (25.2) from end cover (26).

Discard preformed packings.

(15) Remove sockethead screw (27), lockwasher

(28), and knob (29) from shifter arm (25).

WARNING

Wear eye protection and use care

when removing retaining rings.

Retaining rings are under spring

tension and can act as projectiles

when released causing severe eye

injury.

(16) Remove retaining ring (30) from ring gear (31).

(17) Remove end cover (26) from ring gear (31).

(18) Remove preformed packing (32) from end cover

(26). Discard preformed packing.

(19) Remove sun gear (33) from drive coupling (34).

(20) Remove washer (35), drive gear (3 6), thrust

washer support (37), and thrust washer (38)

from end cover (26).

(21) Remove drive coupling (34) from end cover (26).

(22) Remove shifter shaft (39) from end cover (26).

(23) Remove preformed packing (40) from shifter

shaft (39). Discard preformed packing.

(24) Remove two plugs (41) and breather (42) from

end cover (26).

Change 1 28-51