Disassembly -726030540

TM 9-2320-360-34-2

28-4. HYDRAULIC PUMP REPAIR (CONT)

(6) Remove gear housing (5) from bearing carrier

(9).

NOTE

Thrust plate may stay on port end

cover or gear housing.

(7) Remove thrust plate (10) and six pocket seals

(11) from gear housing (5). Discard pocket

seals.

(8) Remove gas ket seal (12) from gear housing (5).

Discard gasket seal.

(9) Remove matched gear set (13 and 14) from

bearing carrier (9).

(10) Remove thrust plate (15) and six pocket seals

(16) from gear housing (5). Discard pocket

seals.

(11) Remove bearing carrier (9) from gear housing

(17).

(12) Remove four bearings (18) and two ring seals

(19) from bearing carrier (9). Discard ring seals.

(13) Remove drive gear connecting shaft (20) from

bearing carrier (9).

28-40