Follow-On Maintenance -726030531

TM 9-2320-360-34-2

WARNING

On direct contact, uncured silicone

sealant irritates eyes.

In case of

contact, flush eyes with water and

seek medical attention. In case of

skin contact, wipe off and flush with

water.

(75) Lightly coat edge of bearing housing (94) on

drive motor (95) with thin layer of silicone

adhesive-sealant.

(76) Install drive motor (95) on brake housing (48)

with two new lockwashers (96) and screws (97).

(77) Install hose (98) on elbow (47) on brake housing

(48).

(78) Install hose (98) on elbow (99) on valve solenoid

(100).

(79) Install hose (101) on elbow (46) on brake

housing (48).

(80) Install hose (101) on fitting (102) on valve

(81) Install cable guard (103) on winch side supports

(18 and 27) with four screws (104), new

lockwashers (105), and nuts (106).

d. Follow-On Maintenance

Fill winch with lubricant (LO 9-2320-360-12).

Change 1 28-31