 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
28-2. WINCH REPAIR (CONT)
(67) Remove two nuts (92), lockwashers (93),
and screws (94) from winch side support
(5) and end supports (48 and 74). Discard
lockwashers.
WARNING
Winch drum weighs 450 lb (204 kg).
Keep out from under winch drum.
Failure to comply may result in injury
or death to personnel.
(68) Attach suitable lifting device to winch drum
(87) and end supports (48 and 74).
(69) Remove six nuts (95), lockwashers (96),
and screws (97) from winch side support
(5) and end supports (48 and 74). Discard
lockwashers.
(70) Remove side support
(5)
from
end
supports (48 and 74).
(71) Repeat steps (67), (69), and (70) for
remaining side support (6).
NOTE
Right and left side winch cable
clamps are removed the same way.
Left side is shown.
(72) Remove two locknuts (98), screws (99),
and cable clamp (43) from side support
(5). Discard locknuts.
28-12
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals