 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
27-4. REAR STEERING GEAR REPAIR
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/ Inspection
INITIAL SETUP
Equipment Conditions
Materials/Parts
Steering gear on clean work surface.
Cloth, Crocus (Item 16, Appendix B)
Compound, Sealing, Pipe Thread (Item 28,
Tools and Special Tools
Tool Kit, Genl Mech (Item 202, Appendix E)
Oil, Hydraulic (Item 39, Appendix B)
Drill Set, Twist (Item 33, Appendix E)
Solvent, Dry Cleaning (Item 54, Appendix B)
Drill, Electric, Portable, 1/4 in. (Item 34,
Gasket/Seal Kit (Item 71, Appendix F)
Lockwashers (24) {Item 127, Appendix F)
Goggles, Industrial (Item 57, Appendix E)
Lockwashers (8) (Item 106, Appendix F)
Hammer, Soft-Faced (Item 63, Appendix E)
Pin, Roll (Item 226, Appendix F)
Pan, Oil Drain (Item 102, Appendix E)
Seal, Quad Ring (Item 319, Appendix F)
Puller Kit, Mechanical, Slide Hammer
(Item 125, Appendix E)
Wrench Set, Socket 3/4 in. Drive (Item 231,
Wrench, Torque, 0-600 Lb-Ft (item 233,
Wrench, Torque, 0-175 Lb-Ft (Item 236,
NOTE
Front and rear steering gears are
assembled differently. Parts are not
interchangeable.
a. Disassembly
(1) Position housing (1) in vise.
(2) Remove three plugs (2) from housing (1).
(3) Remove relief valve (3) and preformed packing
(4) from bearing cap (5). Discard preformed
packing.
(4) Remove relief valve (6) and preformed packing
(7) from cylinder head (8). Discard preformed
packing.
(5) Position drain pan under housing (1).
(6) Turn actuating shaft (9) fully clockwise then fully
counterclockwise to drain oil through relief valve
holes.
(7) Remove eight screws (10) and lockwashers (11)
from pinion gear cover (12).
Discard
27-32
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals