Timing marks on piston and pinion
must be properly aligned. Failure to
comply will cause steering gear to
fall and loss of vehicle control which
may cause serious injury or death to
Center timing m rk (16) on pinion gear (12)
between timing marks (17) on piston (11) and
Install output shaft (13) in housing (2).
Do step (18) if bearing
removed during disassembly.
Bearing must be pressed in until
flush with face of cover.
(18) Install bearing (18) in cover (19).
(19) Lubricate new preformed packing (20) with
hydraulic oil and install on cover (19).
(20) Install cover (19) on housing (2) with eight new
170-180 Ib-ft (231-244 Nm )