 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
(36) Install two new preformed packings (63)
and spool (64) in valve block (49).
(37) Install new preformed packing (65), new
gasket (66), and compensator (67) on
valve block (49) with four screws (68).
Torque to 60-70 lb-in. (6.8-7.9 N m)
(38) Install new preformed packing (69) and
elbow (70) on compensator (67). Tighten
jam nut (71).
(39) Install hose (72) on fitting (46) on valve
block (49).
(40) Install hose (72) on elbow (70).
(41) Install coupling (73) on shaft (6).
(42) Install shipping plug (74) in valve block
(49).
e. Rear Housing Assembly
NOTE
Bearing race is installed with narrow
side to inside housing.
(1) Install bearing race (1) in pump housing
(2).
NOTE
Seal is installed with numbered side
out.
(2) Install seal (3) in pump housing (2).
WARNING
Wear eye protection and use care
when installing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
injury.
(3) Install retaining ring (4) in pump housing
(2).
27-17
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals