 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
25-4. AXLE NO. 4 DIFFERENTIAL REPAIR (CONT)
e. Installation
(1) Attach lifting device to yoke (1).
(2) Remove six screws (2) and differential
assembly (4) from adapter (5).
WARNING
On direct contact, uncured silicone
sealant irritates eyes.
In case of
contact, flush eyes with water and
seek medical attention. In case of
skin contact, wipe off and flush with
water.
(3) Coat
around
mounting
flange
of
differential assembly (4) with silicone
adhesive-sealant.
WARNING
Differential weighs approximately 260
lb (118 kg) and requires the aid of
assistant to move or lift it. Failure to
use caution may result in injury to
personnel.
(4) Install differential assembly (4) on axle
housing (6) while assistant operates lifting
device.
(5) Coat three studs (7) with silicone
adhesive-sealant (6) Install three taper
dowels (8), washers (9), and nuts (10) on
studs (7). Torque to 140-152 lb-ft (190-
206 Nm).
WARNING
Adhesive-sealant may burn or give
off harmful vapors. It is harmful to
skin and clothing. To avoid injury or
death, keep away from open flame
and use in well-ventilated area. If
adhesive-sealant gets on skin or
clothing, wash immediately with soap
and water.
(7) Coat 11 screws (11) with adhesive-sealant
(Item 6, Appendix B).
(8) Install washers (12), screws (11), and two
standoff brackets (13) in differential
assembly (4). Torque to 140-152 Ib-ft
(190-206 Nm).
25-70 Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals