 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well-ventilated
area. If adhesive-sealant gets on skin
or clothing, wash immediately with
soap and water.
(36) Coat four screws (26) with adhesive-
sealant (Item 3, Appendix B).
(37) Install two bearing caps (27) on carrier
housing (6) with four screws (26). Torque
to 25 lb-in. (2.83 Nm).
(38) Install adjusting nut (28) on differential
(18).
(39) Install differential carrier preload gage (29)
on bearing cap (27) with screw (31).
(39.1) Position magnetic base of dial indicator
(30) on bearing cap (27).
(39.2) Position probe of dial indicator (30) on
differential carrier preload gage (29).
(39.3) Zero dial indicator (30).
(39.4) Tighten adjusting nut (28) until bearing
caps (27) expand 0.013-0.018 in. (.33-.46
mm).
(39.5) Remove screw (31), differential carrier
preload gage (29) and dial indicator (30)
from bearing caps (27).
(40) Tighten screws (26) to 123-138 lb-ft (167-
187 Nm).
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well-ventilated
area. If adhesive-sealant gets on skin
or clothing, wash immediately with
soap and water.
(41) Coat screw (31) with adhesive-sealant
(Item 6, Appendix B).
(42) Install nut lock plate (32) on bearing cap
(27) with screw (31). Torque to 132-216
lb-in. (14.9-24.4 Nm).
Change 2 25-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals