 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
25-2. AXLE NO. 2 DIFFERENTIAL REPAIR (CONT)
NOTE
Do step (63) only if dowels fall
inspection.
(63) Remove four dowels (74) from carrier
housing (34).
(64) Remove shim (75) and taper races (76)
from differential (64).
NOTE
Remove taper bearings only if
they fail inspection.
To remove taper bearing from
gear side of differential, first
remove cage and rollers from
inner race. Then pry inner race
up high enough to install puller.
(65) Remove bearing (77) from differential (64)
using puller.
(66) Remove bearing (78) from differential (64)
using puller.
(67) Rotate carrier housing (34) so pinion shaft
(56) is parallel to floor.
(68) Unstake inner edge of nut (79) away from
pinion shaft (56).
(69) Position jet extractor (80) between teeth of
pinion gear (65) and housing (34) with aid
of assistant.
(70) Remove nut (79) from pinion shaft (56)
using spanner nut socket (81) and torque
multiplier with aid of assistant. Discard
nut.
(71) Remove jet extractor (80) from housing
(34).
25-12 Change 1
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals