 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-360-34-2
(31) Remove six screws (46) and three plates
(47) from ring and pinion assembly (48).
(32) Remove ring gear carrier (49) from gear
carrier assembly (50).
(33) Remove input shaft (11) and gear carrier
assembly (50) from carrier housing (34).
WARNING
Wear eye protection and use care
when removing retaining rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
Injury.
(34) Remove retaining ring (51) from input
shaft (11).
(35) Place gear carrier assembly (50) on
wooden blocks.
(36) Remove gear carrier assembly (50) from
input shaft (11) using soft-faced hammer.
NOTE
Do step (37) only if sleeve fails
inspection.
(37) Remove sleeve (52) from Input shaft (11).
(38) Remove retaining ring (53) from sun gear
(54).
(39) Remove washer (55) and sun gear (54)
from pinion shaft (56).
25-9
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals