 |
|||
|
|
|||
|
Page Title:
MAIN CONTROL VALVE REPAIR (CONT) |
|
||
| ||||||||||
|
|
 TM 9-2320-360-34-2
22-14. MAIN CONTROL VALVE REPAIR (CONT)
CAUTION
Install adjusting ring in position
marked during removal. Damage to
transmission may result if not
assembled to same notch.
(40) Install actuator pin (84), modulator valve
(85), spring (86), and adjusting ring (87) in
modulator valve body (88).
(41) Press adjusting ring (87) and insert
retaining pin (89) in modulator valve body
(88).
(42) Place modulator valve body (88) on oil
transfer plate (78) and install three screws
(90). Torque to 96-144 lb-in. (10.8-16.3
Nm).
(43) Remove six screws (84) from oil transfer
plate (78) and control valve body (1).
e. Installation
(1) Install control valve body (1) in
transmission housing (2) making sure shift
rack pin (3) engages slot on selector valve
(4).
(2) Install two washers (5) and screws (6) on
control valve body (1).
(3) Install selector detent assembly (7) and
screw (8) on control valve body (1).
22-74
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals