|
|
TM 9-2320-360-34-2
(21) Remove spring (40), valve stop (41), plug
(42), and second clutch trimmer valve (43)
from control valve body (5).
(22) Remove spring (44), valve stop (45), and
accumulator valve (46) from control valve
body (5).
(23) Remove retainer pin (47), spring spacer
(48), spring (49), and three-four relay
valve (50) from control valve body (5).
(24) Remove retaining pin (51), valve stop
(52), spring (53), and two-three relay valve
(54) from control valve body (5).
(25) Remove retaining pin (55), spring (56),
valve stop (57), and governor accumulator
valve (58) from control valve body (5).
CAUTION
Mark position of adjusting ring before
removal.
Improper shifting and
possible damage to transmission
may result if not assembled to same
notch.
(26) Remove retaining pin (59), adjusting ring
(60), washer (61), valve stop (62), valve
spring (63), and hold regulator valve (64)
from control valve body (5).
22-67
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |