TURBOCHARGER REPAIR (CONT) -726030170

TM 9-2320-360-34-2

(33) Position dial Indicator (23) on compressor

housing (30).

CAUTION

Do not allow sides of extension rod

to touch sides of center housing.

Inaccurate reading may result in poor

fit and damage to turbocharger.

(34) Install extension ro d of dial indicator (23) in oil

drain hole in center housing (2) so that rod is

against turbo wheel shaft (18).

NOTE

If fit of shaft is not within limits,

disassemble

and

inspect

turbocharger.

(35) Move shaft (18) up and down. Shaft must not

move more than 0.0070 in. (0.178 mm) or less

than 0.003 in. (0.076 mm).

20-25 (20-26 blank)