 |
|||
|
|
|||
|
Page Title:
FLYWHEEL HOUSING REPAIR (cont.) |
|
||
| ||||||||||
|
|
 TM 9-2320-360-34-2
d. Assembly
WARNING
Pipe thread sealing compound can
burn easily, can give off harmful
vapors, and Is harmful to skin and
clothing. To avoid Injury or death,
keep away from open lire and use In
well-ventilated area. If pipe thread
sealing compound gets on skin or
clothing, wash Immediately with soap
and water.
(1) Coat threads of pipe plugs (1 and 2) with
pipe thread sealing compound.
(2) Install pipe plug (1) in backside of flywheel
housing (3).
(3) Install pipe plug (2) In bottom of flywheel
housing (3).
(4) Install oil seal (4) using seal installer (5).
e. Installation
(1) Install two lifting eyes (1) in flywheel
housing (2).
(2) Coat gear train teeth (3) with lubricating
oil.
(3) Set flywheel housing (2), engine side up,
on flat surface.
(4) Coat engine side of flywheel housing (2)
with grease.
(5) Install new gasket (4) on engine side of
flywheel housing (2).
(6) Coat gasket (4) with grease.
(7) Install four guide screws (5) in engine
block (6).
(8) Install lifting device while assistant
positions flywheel housing (2) over
crankshaft (7) and against engine block
(6).
19-77
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals