 |
|||
|
|
|||
|
Page Title:
FLYWHEEL HOUSING REPAIR (cont.) |
|
||
| ||||||||||
|
|
 TM 9-2320-360-34-2
a. Removal
NOTE
Tag and mark hoses before removal.
(1) Remove two fuel hoses (1) from elbows
(2) on fuel block (3).
(2) Disconnect fuel pressure transducer (4)
from STE/ICE engine wire harness (5).
NOTE
Left and right brackets are removed
the same way. Left side is shown.
(3) Remove four screws (6), washers (7), and
lockwashers (8) from two brackets (9).
Discard lockwashers.
(4) Remove two screws (10), lockwashers
(11), and brackets (9) from cylinder heads
(12). Discard lockwashers.
(5) Install two lifting eyes (13) on flywheel
housing (14).
(6) Support flywheel housing (14) with lifting
device.
NOTE
Tag and mark all screws before
removal.
(7) Remove six screws (15) from flywheel
housing (14). Discard screws.
(8) Remove six screws (16) and washers (17)
from flywheel housing (14).
19-73
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals