|
| |
TM 9-2320-360-34-1
Check terminals at ECM engine harness
connector (both ECM and harness side) for
damage; bent, corroded, and unseated pins or
sockets.
CAUTION
Use
jumper
wire
only
between
terminals
indicated.
Failure
to
comply may result in damage to
DDEC components or wiring.
CONTINUITY TEST
(1) Remove ECM (TM 9-2320-360-20).
(2) Disconnect SRS connector.
(3) Read resistance between sockets S1
and S2 on engine harness connector.
CONTINUITY TEST
(1) Remove ECM (TM 9-2320-360-20).
(2) Disconnect SRS connector.
(3) Read resistance between sockets S1
and S2 on engine harness connector.
2-23
|
