|
| |
TM 9-2320-360-34-1
2-4. INTRODUCTION TO LOGIC TREE TROUBLESHOOTING (CONT)
(3)
J1708 Menu Commands
(a)
Setup Menu Commands. The commands in this section allow the operator to customize to main
display area of the program. The operator has the option of selecting a previously displayed for mat
and save a new display format.
1. New.
The New command will delete all items that are on the Data Display Window. This
includes all display setups and data. Do not use this command if you wish to delete only
data information.
2. Load.
The Load command allows the user to select and load a Display Setup File which has
been previously saved. These file names will be listed on the display and will be
identified by the extension ‘’
.jdi". Only files with the ".jdi" extension are
allowed to load.
3. Save.
The Save command allows the user to save a custom display as a new Display Setup
File. The new file name must contain no more than eight characters, followed by the
".jdi" extension.
4. Save As.The Save As command allows the user to save a Display Setup File under a different file
name. With this command, the operator can copy a frequently used Display Setup so it
can be modified for a new need. The new file name must contain no more than eight
characters, followed by the ".jdi" extension.
5. Delete.
The Delete command allows the user to delete a Display Setup File. Only a file with a
".jdi" extension is allowed to be deleted.
6. Define.
The Define command allows define CTS J1708 options. When Define is selected, four
choices are given:
Connector.
Allow user to select the DCA connector or the diagnostic data link (DDL)
connector located inside the electrical control box (ECB).
Bus.
Not applicable.
Data.
Allows the user to select and deselect the data lines displayed on the main
display area of the screen. The information will be displayed in a text
format.
Graphics.
The operator can select between three types of graphics readouts: digital
readout, bar graph readout, or gage readout.
2-6 Change 2
|
