|
| |
TM 9-2320-360-34-1
3-3. ENGINE/TRANSMISSION ASSEMBLY REPLACEMENT (CONT)
(36) Route hose no. 2096 (88) and no. 2159
(89) between transmission (90) and power
steering pump support bracket (91) to air
compressor (92).
(37) Install hose no. 2096 (88) on air
compressor (92).
(38) Install hose no. 2159 (89) on air
compressor governor (93).
NOTE
Plastic
cable
ties
should
be
positioned
in
locations
marked
during removal.
(39) Secure hose no. 2096 (88) and hose no.
2159 (89) with plastic cable ties (40) as
required.
WARNING
Adhesive-sealant can burn easily,
can give off harmful vapors, and is
harmful to skin and clothing. To
avoid injury or death, keep away from
open fire and use in well-ventilated
area. If adhesive sealant gets on skin
or clothing, wash immediately with
soap and water.
(40) Coat threads of four screws (94) with
adhesive-sealant.
(41) Install propeller shaft (95) on transmission
(90) with two clamps (96) and four screws
(94). Torque to 115-135 lb-ft (156-183
Nm).
3-28
|
