|
| |
TM 9-2320-360-34-1
b.
Installation
(1)
Attach lifting chain (1) to lifting brackets
(2). Refer to table 3-1 for correct chain
lengths.
(2)
Attach guide ropes to lifting brackets (2)
on left and right of engine/transmission
assembly (3).
WARNING
·
Engine/transmission
assembly
weighs 4206 lb (1908 kg). Stay
clear
of
engine/transmission
assembly when It is supported by
lifting device. If engine falls,
serious Injury or death may
result.
·
Use guide straps or rope to guide
engine/transmission
assembly
while lifting. Failure to comply
may result In Injury to personnel.
CAUTION
Ensure all lines, hoses, and electrical
cables
are
secured
to
engine/transmission assembly and
chassis to prevent damage to them
when lowering engine/ transmission
assembly.
(3)
Lift engine/transmission assembly (3) 2 in.
(5 cm) off jackstands (4).
(4)
Install two screws (5) in trunnion support
(6).
(5)
Position engine/transmission assembly (3)
on front cross-member (7) and two engine
mount
frames
(8)
with
aid
of
two
assistants.
(6)
Install two new locknuts (9) on screws (5).
Torque to 210 lb-ft (285 N-m).
3-21
|
