|
| |
TM 9-2320-360-34-1
FRONT STEERING GEAR TEST
(1) Remove locknut, screw and rear steering
shaft yoke from tee box. Discard locknut.
(2) Start engine (TM 9-2320-360-10).
(3) Detect steering effort while turning steering
wheel from straight ahead to full left and full
right positions.
(4) Return steering wheel to straight ahead
position.
(5) Shut off engine (TM 9-2320-360-10).
(6) Align slot on yoke with key on tee box
shaft.
(7) Install rear steering shaft yoke on tee box
with screw and new locknut.
REAR STEERING GEAR TEST
(1) Remove locknut, screw and front steer-
ing shaft yoke from tee box. Discard
locknut.
(2) Start engine (TM 9-2320-360-10).
(3) Detect steering effort while turning
steering wheel from straight ahead to
full left and full right positions.
(4) Return steering wheel to straight ahead
position.
(5) Shut off engine (TM 9-2320-360-10).
(6) Align slot on yoke with key on tee box
shaft.
(7) Install front steering shaft yoke on tee
box with screw and new locknut.
2-157
|
