|
| |
TM 9-2320-360-34-1
WARNING
Wear approved eye protection when
performing
transmission
pressure
checks. Failure to comply may result in
oil getting into eyes. If oil contacts
eyes,
seek
medical
attention
immediately.
MAIN PRESSURE TEST
(1) Remove main pressure oil line no. 2672
from main pressure port on transmission
converter housing.
(2) Install tee, 0-2000 psi (0-13,790 kPa)
gage and main pressure oil line no. 2672 in
main pressure port on converter housing.
(3) Start engine (TM 9-2320-360-10) and run
at idle.
(4) With parking brake applied, position
transmission range selector to 2-5
position.
(5) Check reading on pressure gage.
(6) Shut off engine (TM 9-2320-360-10).
(7) Remove pressure gage from main
pressure oil line and install main pressure
oil line on main pressure port
INTERNAL FILTER ELEMENT
INSPECTION
(1) Remove oil pan (para 7-5).
(2) Check internal filter element for damage or
restrictions.
2-107
|
