|
| |
TM 9-2320-360-34-1
Refer to para 3-28 to check cylinder compression.
CYLINDER HEAD GASKET
INSPECTION
(1) Open hood (TM 9-2320-360-10).
(2) Remove radiator cap from radiator.
(3) Install adapter on radiator.
(4) Install cooling system pressure tester on
adapter.
CAUTION
Do not pressurize over 10 psi (69 kPa).
Failure to comply may result in damage
to cooling system.
(5) Pressurize cooling system to 10 psi (69 kPa)
and check cylinder head for leaks.
(6) Release pressure and remove cooling system
pressure tester from adapter.
(7) Remove adapter from radiator.
(8) Install radiator cap on radiator.
(9) Close hood (TM 9-2320-360-10).
Change 2 2-95
|
