|
| |
TM 9-2320-360-34-1
CYLINDER CUTOUT TEST
(1) Connect DDR to DDL connector (page 2-6).
(2) Start engine (TM 9-2320-360-10).
(3) Select Mode 11 (Cylinder Cutout) on DDR and
record displayed pulse widths.
(4) Shut off engine (TM 9-2320-360-10).
(5) Disconnect DDR from DDL connector.
INJECTOR RESPONSE TIME TEST
(1) Connect DDR to DDL connector (page 2-6).
(2) Start engine (TM 9-2320-360-10).
(3) Select MODE 10 (Fuel Injector Response
Times) on DDR.
(4) Compare injector response times of all eight
injectors.
(5) Shut off engine (TM 9-2320-360-10).
(6) Disconnect DDR from DDL connector.
Change 2 2-93
|
