|
| |
TM 9-2320-360-34-1
(1)
Fabricat e from 1/8 in. (3.2 mm) aluminum plate.
(2)
Cut aluminum plate to 11 X 17 in. (28 X 43 cm).
(3)
Using file or grinder, remove any sharp edges.
(4)
Using punch or awl, scribe a line 3/4 in. (1.9 cm) from bottom of plate.
(5)
Scribe second line 90 degrees from first line, 8 1/2 in. (22 cm) form edge of plate
(6)
Using compass, scribe lines at 7 1/2 degrees, 10 1/2 degrees, 34 1/2 degrees and 37 1/2 degrees from line
made in step (4).
(7)
Repeat step (6) for other side of template.
(8)
Using letter punc hes, identify the 34 1/2 and 37 1/2 degree lines as 'FRONT" and the 7 1/2 and 10 1/2
degree lines and "REAR".
Figure C-22. Steering Radius Template
C-16 Change 1
|
