TM 9-2320-360-34-1(8)Cut 0.25 x 4 x 4 in. (6.35 x 102 x 102 mm) steel plate.(9)Drill three 0.50 in. (12.7 mm) holes through center of steel plate.(10)All dimensions are inches (millimeters).(11)Assemble parts using 3/8-16 x 3-1/4 in. bolt and 3/8-16 nut.Figure C-18. Idler Gear Holding Fixture (Cont)Change 1 C-13
