|
| |
TM 9-2320-360-34-1
(1)
Fabricate from 3/16 x 1 x 6 in. (4.8 x 25 x 152 mm) or longer flat steel stock.
(2)
Using hacksaw, cut steel stock to 6 in. (152 mm) length.
(3)
Using file or grinder, remove any sharp edges.
(4)
All dimensions are in inches (millimeters).
Figure C-12. 3/16-Inch Steel Plate
(1)
Fabricate from 1/16 x I x 6 in. (1.6 x 25 x 152 mm) or longer flat steel stock.
(2)
Using hacksaw, cut steel stock to 6 in. (152 mm) length.
(3)
Using file or grinder, remove any sharp edges.
(4)
All dimensions are in inches (millimeters).
Figure C-13. 1/16-Inch Steel Plate
C-8
|
