|
| |
TM 9-2320-360-34-1
(103.2)
Remove plug (173) from electronic control
box (172).
(103.3)
Install receptacle (174) in electronic control box
(172) with lockwasher (175) and nut (176).
(103.4)
Install wire no. 1378 (177) on receptacle
(174) with screw (178).
(103.5)
Remove wires no. 1340 and no. 1082
(179) from heater circuit breaker (180).
(103.6)
Install wire no. 1378 (177) on heater circuit
breaker (180).
(103.7)
Install wires no. 1340 and no. 1082 (179)
on wire no. 1378 (177).
(103.8)
Install three panels (171) on electronic
control box (172) with 19 screws (173).
NOTE
12-volt alternator belt, 24-volt alternator
belt, and fan belts must be changed to
withstand low temperatures of -50 to -
26° F (-46 to -32° C).
(104)
Replace
12-volt
(rear)
alternator
belt
(TM 9-2320-360-20).
(105)
Replace
24-volt
(front)
alternator
belt
(TM 9-2320-360-20).
(106)
Replace fan belts (TM 9-2320-360-20).
b.
Follow-On Maintenance (1) Install batteries
(TM 9-2320-360-20).
(2)
Connect arctic kit batteries (TM 9-2320-360-20).
(3)
Fill cooling system (TM 9-2320-360-20).
(4)
Operate coolant pump and check for leaks
(TM 9-2320-360-10).
(5)
Close engine hood (TM 9-2320-360-10).
(6)
Install exhaust heat shield (TM 9-2320-360-20).
(7)
Install inner fender (TM 9-2320-360-20).
18-18 Change 1
|
