|
| |
TM 9-2320-360-34-1
(29)
Insert wire no. 1435 (54) and wire no.
1373 (55) through rubber grommet (31).
(30)
Install wire no. 1435 (54) and negative (-)
cable (27) on cable clamp (56) with screw
(57), washer (58), lockwasher (59), and
nut (60). Torque to 144-192 lb-in. (16.1-
21.5 Nm).
(31)
Install wire no. 1373 (55) and positive (+)
cable (17) on cable clamp (61) with screw
(62), washer (63), lockwasher (64), and
nut (65). Torque to 144-192 lb-in. (16.1-
21.5 Nm).
(32)
Connect two wires no. 1373 (66) to toggle
switch (50) with two screws (67).
(33)
Install two clips (68) on wire harness (52).
(34)
Position two clips (68) along wire harness
(52) at mounting position on muffler
bracket (47).
(35)
Install two clips (68) on muffler bracket
(47) with screws (69) and nuts (70).
(36)
Install standoff bracket (71) on right cab
mount (72) with screw (73) and nut (74).
(37)
Install clip (75) on wire harness (52) and
standoff bracket (71) with screw (76) and
nut (77).
Change 1 18-7
|
