|
| |
TM 9-2320-360-34-1
18-2. ARCTIC KIT INSTALLATION (CONT)
(22)
Install two cable clamps (37) on jumper
cable (38) with two screws (39), washers
(40), lockwashers (41), and nuts (42).
Torque to 144-192 lb-in. (16.1-21.5 Nm).
(23)
Install jumper cable (38) on battery posts
(43 and 44).
(24)
Lightly coat battery posts (43 and 44) with
grease.
(25)
Tighten two nuts (45) on jumper cable
(38). Torque to 84-96 lb-in. (9.4-10.8
Nm).
(26)
Install toggle switch bracket (46) on
muffler bracket (47) with screw (48) and
nut (49).
(27)
Install toggle switch (50) on bracket (46)
with nut (51).
(28)
Route wire harness (52) with in-line fuse
holder (53) from toggle switch (50) to
arctic battery box (5).
18-6 Change 1
|
