|
| |
TM 9-2320-360-34-1
(15)
Install two clips (28) on negative (-) cable
(27) and positive (+) cable (17).
(16)
Install two clips (28) on frame assembly
(10) with screws (29) and nuts (30).
CAUTION
Ensure
rubber
grommets
are
installed correctly in holes on side of
arctic battery box to prevent cables
from shorting out on box.
(17)
Install two rubber grommets (31 and 32) in
arctic battery box (5).
(18)
Insert negative (-) cable (27) from shunt
(14) through rubber grommet (31).
(19)
Insert positive (+) cable (17) from starter
through rubber grommet (32).
WARNING
Batteries produce explosive gases.
Keep sparks and open flame away
from batteries. Failure to comply
may result in serious injury to
personnel.
(20)
Install two batteries (33) in arctic battery
box (5).
(21)
Install two holddowns (34) on batteries
(33) with four washers (35) and nuts (36).
18-5
|
