|
| |
TM 9-2320-360-34-1
17-10. KICKOUT PISTON AND SEALS REPAIR (CONT)
(17)
Remove two nuts (19) and threaded rods
(18) from clutch end cover (17).
(18)
Install two new lockwashers (20) and
screws (21) on clutch end cover (17).
(19)
Tighten six screws (21) to 35 lb-ft (47.5
Nm).
c.
Follow-On Maintenance
(1)
Fill
winch
with
lubricant
(LO 9-2320-360-12).
(2)
Check winch operation.
(3)
Remove wheel chocks.
17-36
|
