|
| |
TM 9-2320-360-34-1
17-10. KICKOUT PISTON AND SEALS REPAIR (CONT)
WARNING
Wear eye protection and use care
when
installing
retaining
rings.
Retaining rings are under spring
tension and can act as projectiles
when released causing severe eye
injury.
NOTE
Right and left sides are assembled
the same way. Left side is shown.
(3)
Install new retaining ring (3) and piston (4)
on clutch drive gear (5).
(4)
Install new preformed packing (6) and two
new preformed packings (7) on piston (4).
(5)
Install piston (4) on clutch adapter (2).
WARNING
On direct contact, uncured silicone
sealant irritates eyes. In case of
contact, flush eyes with water and
seek medical attention. In case of
skin contact, wipe off and flush with
water.
NOTE
Clutch adapter should be positioned
on
planetary
adapter
cover
as
marked during removal.
(6)
Coat mating surfaces of planetary adapter
cover (8) and clutch adapter (2) with
silicone adhesive-sealant.
(7)
Install clutch adapter (2) on planetary
adapter
cover
(8)
with
six
new
lockwashers (9) and screws (10). Torque
to 276 lb-in. (31.2 Nm).
(8)
Connect two air lines (11) to fittings (1).
17-34
|
