|
| |
TM 9-2320-360-34-1
17-9. AUXILIARY WINCH DRIVE MOTOR REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Tools and Special Tools
Engine shut off (TM 9-2320-360-10).
Tool Kit, Genl Mech (Item 202, Appendix E)
Parking brake on (TM 9-2320-360-10).
Wheels chocked.
Materials/Parts
Lockwashers (2) (Item 122, Appendix F)
Packings, Preformed (2) (Item 201, Appendix F)
a.
Removal
(1)
Remove screw (1) from counterbalance
valve (2).
(2)
Remove four screws (3), counterbalance
valve (2), and two preformed packings (4)
from drive motor (5). Discard preformed
packings.
(3)
Remove two screws (6), lockwashers (7),
and washers (8) from auxiliary winch (9).
Discard lockwashers.
(4)
Remove auxiliary winch drive motor (5)
from auxiliary winch (9).
b.
Installation
(1)
Install auxiliary winch drive motor (5) on
auxiliary winch (9) with two washers (8),
new lockwashers (7), and screws (6).
(2)
Install counterbalance valve (2) and two
new preformed packings (4) on auxiliary
winch drive motor (5) with four screws (3).
(3)
Install screw (1) on counterbalance valve
(2).
c.
Follow-On Maintenance
Check
auxiliary
winch
operation
(TM 9-2320-360-20).
17-29
|
