|
| |
TM 9-2320-360-34-1
17-3. WINCH PLATFORM REPLACEMENT (CONT)
NOTE
Do
step
(14)
only
if
replacing
mounting plates.
(14) Remove 28 locknuts (23), screws (24),
and four mounting plates (18) from frame
rail (25) with aid of assistant. Discard
locknuts.
b.
Installation
CAUTION
The two lower left screws on driver's
side rear plate must be installed from
inside of frame rail. Failure to
comply may result in damage to
steering shafts.
NOTE
Do step (1) only if mounting plates
were removed.
(1)
Position four mounting plates (1) on frame
rail (2) with 28 screws (3) and new
locknuts (4) with aid of assistant. Do not
tighten.
WARNING
Winch platform weighs 1225 lb (556
kg). Stay clear of winch assembly
while lifting. Failure to do so may
result in serious injury or death to
personnel.
(2)
Attach lifting device to winch platform (5).
(3)
Raise lifting device and winch platform (5)
and position on HET tractor with aid of
assistant.
(4)
Install winch platform (5) on mounting
plates (1) with 28 screws (6) and new
locknuts (7) with aid of assistant Torque to
375 lb-ft (508 Nm).
(5)
Tighten 28 screws (3) to 375 lb-ft (508
Nm).
17-10
|
