|
| |
TM 9-2320-360-34-1
17-2. WINCH REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Chock block stowage block removed
Tags, Identification (Item 56, Appendix B)
(TM 9-2320-360-20).
Locknuts (4) (Item 81, Appendix F)
Control console panels removed
Lockwashers (8) (Item 125, Appendix F)
(TM 9-2320-360-20).
Winch cable removed (TM 9-2320-360-20).
Personnel Required
Two
Tools and Special Tools
Tool Kit, Genl Mech (Item 202, Appendix E)
Sling, Endless Strap (Item 161, Appendix E)
Wrench, Torque, 0-600 Lb-Ft (Item 233,
Appendix E)
a.
Removal
NOTE
· Both winches are replaced the
same way. Left side if shown.
· Do step (1) for left side only.
· Tag and mark air lines before
removal.
(1)
Remove four locknuts (1), screws (2) and
grab handle (3) from winch assembly (4)
and winch platform (5). Discard locknuts.
17-2
|
