|
| |
TM 9-2320-360-34-1
(30)
Install yoke (69) on transfer case shift
cable (64).
(31)
Install pin (70) in transfer case shift lever
(71) and yoke (69).
(32)
Install new cotter pin (72) in pin (70).
(33)
Tighten jamnut (73) on yoke (69).
(34)
Install four male electrical terminal blocks
(74) on four receptacles (75). Tighten four
screws (76) in center of male electrical
terminal blocks (74).
(35)
Install two clips (77) on standoff bracket
(78) with screw (79) and new locknut (80).
(36)
Connect 10-pin electrical connector (81) to
receptacle (82).
Change 1 16-27
|
