|
| |
TM 9-2320-360-34-1
16-2. CAB REPLACEMENT (CONT)
(18)
Install heater hose (39) on shutoff valve
(41) with clamp (42). Torque clamp to 40
lb-in. (4.5 Nm).
(18.1)
Install heater hose (42.1) on pipe (42.2)
with clamp (42.3). Torque clamp to 40 lb-
in. (4.5 Nm).
(18.1)
Install two clips (42.4) on firewall (42.5)
with screw (42.6).
CAUTION
When properly installed, oil hoses
must be secured away from exhaust
pipe. Failure to comply may result in
damage to oil hoses.
(19)
Install two new preformed packings (43),
new
preformed
packing
(44),
new
preformed packing (45), and oil hoses no.
2302 (46), no. 2883 (47), no. 2278 (48),
and no. 2701 (49) on steering reservoir
(50).
NOTE
If engine was removed, do step (20).
(20)
Tighten hose no. 2302 (46) and hose no.
2278 (47) on steering pump (51).
16-24 Change 2
|
