|
| |
TM 9-2320-360-34-1
WARNING
·
Cab weighs 2600 lb (1179 kg). Stay clear of cab when it is supported by lifting
device. If cab falls, serious injury of death may result. Use 10 ft (3 m)
guidelines to help guide cab during installation.
·
Refer to Figure 16-2, Warning Zone Diagram, for proper placement of personnel
when installing cab. Failure to comply may result in serious injury or death to
personnel.
·
Ensure personnel are clear of lifting area. All personnel are within visual sight
of each other and not within 15 ft (4.6 mm) of cab when lifting is in process.
Failure to comply may result in serious injury or death to personnel.
CAUTION
·
Ensure lifting device is centered
over cab before lifting. Failure
to comply may result in damage
to cab.
·
Ensure all
hoses
and
wire
harnesses are secured away
from cab mount areas before
attempting to install cab. Failure
to comply may result in damage
to equipment.
(5)
Raise cab (3) and position above frame
(12).
(5.1)
Lower cab (3) until mounting screws (4)
slide in biscuits (13).
(6)
Install cab (3) on frame (12) with aid of
assistants.
Change 1 16-19
|
